Installation: Mounts directly to stock water pump locations by removing existing fan, pulley, plate and impeller; includes stainless steel mounting hardware and gasket for simple installation.
Benefits: Eliminates drive belt and fan to save weight and horsepower while providing maximum circulation to improve cooling efficiency during all driving conditions, especially while idling.

Flow Rate: 35GPM (6440) / 55GPM (6540)
Weight: 3.0 Lbs. (6440) / 4.0 Lbs. (6540)
Type of Finish: Machined
Special Coating: Bright Anodized
Fasteners & Hardware: Stainless Steel

PART #
6440 B/RB/HEMI 361-440
6540 B/RB/HEMI 361-440 (55GPM)

Note: For Proflo Maximum pumps, add 0.5” to the height of motor.

Fasteners & Hardware: Stainless Steel
Type of Material: Cast Aluminum

PART #
7426 B/RB/HEMI 361-440

Note: Accepts factory accessory brackets.

Flow Rate: 35GPM (7440) / 55GPM (7540)
Fasteners & Hardware: Stainless Steel
Amperage Draw: 6.1 Amps.
Voltage: 12V
Type of Material: Cast Aluminum

PART #
7440 B/RB/HEMI 361-440 (35GPM)
7540 B/RB/HEMI 361-440 (55GPM)

Installation:
Part #7426 mounts directly in place of cast iron unit and accepts factory impeller housing assembly.
Part #7440 mounts directly to stock water pump locations by removing existing fan and pulley; includes stainless steel mounting hardware and gasket for simple installation.

Benefits:
Eliminates drive belt and fan to save weight and horsepower while providing maximum circulation to improve cooling efficiency during all driving conditions, especially while idling.