Flow Rate: 35GPM (6351) / 55GPM (6551)
Weight: 3.0 Lbs. (6351) / 4.0 Lbs. (6551)
Type of Finish: Machined
Special Coating: Bright Anodized
Fasteners & Hardware: Stainless Steel
Amperage Draw: 6.1 Amps.
Voltage: 12V
Type of Material: T6-6061 Billet Aluminum

PART #
6351 GM LT-1 Small Block
6551 GM LT-1 Small Block (55GPM)

Installation:
On the LT-1 engine the factory pump is cam driven. Installation of this unit requires removal of the housing, disassembly and plugging of the drive hole and reinstallation. From there our unit plugs right into the housing supplied with seal and stainless fasteners.

Note: For Proflo Maximum pumps, add 0.5” to the height of motor.

Flow Rate: 35GPM (6352) / 55GPM (6552)
Type of Finish: Machined
Special Coating: Bright Anodized
Fasteners & Hardware: Stainless Steel
Amperage Draw: 6.1 Amps.
Voltage: 12V
Type of Material: Cast/T6-6061 Billet Aluminum

PART #
6352 GM LS-1 Small Block
6552 GM LS-1 Small Block (55GPM)

Note:
Not compatible with factory drive belt systems. Can be used for Street or Race applications. Bolts directly in place of factory unit.